The Laser Work Path Optimizing Feature Within the TruCUT RDWorks (Part 7)

rdworks path optimization

When you want to optimize your paths but you are not too sure how to go about it, use this feature.

The Path Optimize feature can save you some time on the final cut when enabled, but keep in mind that it is better to disable this feature if you have already optimized the paths yourself.

This video is part of a Mini-Series.
Next video covers Select Graphics.
Previous video covered Cut & Go Scale.

Training Video with Voice-Over ( Sounds ON ), Please Subscribe

Video Transcript

How are you guys? In today's video? We're gonna be looking at the path optimised feature located under your laser work panel, and this was before. True, That already works. But before that, let's have a quick intro first so today's video can be found on softwaretraining.co.za. They'll see you today. We make sure and easy to watch problem solving videos. And we also have daily updates. Otherwise, we're back in the programme here. Now, Just a reminder. This is a miniseries on the lazy work panel. And also I'll leave relevant links in description so you can follow along. And if for any reason you do not see your panel, you can just go to view your main menu and then the process control panel. Just talk all the visibility there, on and off. So now, as to the feature optimised part, as you guys might remember in a, uh, some earlier videos, we looked at your path and how to optimise it, Um or rather, some tools used to optimise it. And then, um yeah, so if you have not set up your path, optimising like or if you have not optimised your path and what you can simply do is you go here on your lazy work panel and then cheque this little box up to my, um, sorry path optimise. Now, if you have already optimised your path, I would recommend leaving this unchecked, as this requires extra basically loading or increases the waiting time when it does the when you finally decide to cut or start your thing. So, like I said, if you have already set up your path and optimise it, then leave that off. Otherwise, click it on and it will try optimise it for your to fit your process best. Otherwise, yeah, that is it on the path optimise. It's a simple thing. Like I said, just the quick recap. If you have set it up, don't use it. If you have not set up, you can use it. But either way, you can still use it, even if you set it up. It's just like I said, it takes more time to process. Otherwise, we are to adhere to softwaretraining.co.za. They'll see that you guys are not just a variety of different software to recover, and also you can isolate your search on the top, right? If you do not, however, find what you're looking for. Just go here. Um, request the training video filling the mini form. And then we will make that video for you. But otherwise thanks, guys, for watching and cheers.

brew (1) care (1) con (1) device (1) fig (1) graphics (1) handle (1) help (1) mark (1) model (1) move (1) optimize (1) out (1) out rut (1) path (1) position (1) powers (1) rut (1) save (1) select (1) test (1) tom (1) too (1) tool (1) user (1) view (1) work (1)
area (1) auto (1) axis (1) continue (1) cut (1) cutting (1) cutting propose (1) device (2) device auto (1) display (1) doc (1) download (1) fault (1) fie (1) file (1) file output (1) flight (1) focus (1) graphics (1) help (1) home (3) inn (1) laser (3) mod (1) move (2) moving (1) offset (1) optimize (1) output (3) output doc (1) path (1) pause (1) pause continue (1) position (2) power (1) propose (1) save (1) save fie (1) scale (2) select (1) setting (1) speed (1) start (1) stop (1) system (1) test (1) transform (1) use (1) user (1) welcome (1) work (3)
software (1) software training (1) training (1)
area (1) auto (1) axis (1) boo (1) continue (1) cut (1) cut scale (1) cutting (1) cutting propose (1) device (2) device auto (1) display (1) doc (1) download (1) fault (1) fie (1) figs (1) file (1) file output (1) flight (1) focus (1) graphics (1) handle (1) home (3) laser (2) mks (1) model (1) move (2) moving (1) offset (1) optimize (1) output (3) output doc (1) path (1) pause (1) pause continue (1) position (2) power (1) propose (1) save (1) save fie (1) scale (2) select (1) setting (1) speed (1) start (1) stop (1) system (1) test (1) time (1) transform (1) use (1) user (1) welcome (1) who (1) work (3) works (1)
cad (1) categories (1) colour (1) creation (1) cut (7) fabric (1) follow (1) fusion (1) label (1) label mark (1) laser (2) laser cut (1) mark (1) paint (1) photo (1) photo print (1) print (2) problem (1) request (2) route (2) search (1) software (5) software training (2) solving (1) tarter (1) tools (1) top (1) training (8) video (3) videos (4) vinyl (2) vinyl cut (2) ware (1) works (2)

VinylCut Software

Short Problem Solving Easy-to-Follow Videos

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply